Digital Thermostat: heat/cool, day/night – day and night thermostat
Digital heat/cool thermostat with separate day and night settings for heating and cooling devices…
Use our advisor — find the perfect equipment for your reptiles.
Find a productUse our advisor — find the perfect equipment for your reptiles.
Find a productProduct description
This thermostat suits keepers who need to hold both a minimum and a maximum temperature in a terrarium or aquarium, with different targets for day and night. It has separate heating and cooling outputs, so one unit can control a heat source and a cooling device at the same time.
Why it matters
- Separate heating and cooling outputs, with independent day and night settings, let you control both temperature limits from one controller.
- Temperature is read and set to 0.1°C, while the control action has a maximum error of 1°C, which defines how closely the unit holds the set point.
- The waterproof probe (8 x 8 x 40 mm) can be placed directly in water, and the cable has a threaded fitting with a gasket to simplify the first installation.
- Three touch buttons are used for programming setpoints, day and night start times, hysteresis and the alarm. Full setup takes about 2 minutes.
Specifications
- Maximum load: 1200 W (2 x 600 W)
- Operating range: -30°C to 90°C
- Reading and programming accuracy: 0.1°C
- Control accuracy (maximum error): 1°C
- Temperature measurement interval: 5 s
- Display unit dimensions: 107 x 88 x 38 mm
- Socket unit dimensions: 110 x 63 x 44 mm
- Probe dimensions: 8 x 8 x 40 mm
- Probe cable length: 200 cm
- Power cable length: 150 cm (EU plug with earth)
- Socket cable length: 200 cm (EU earthed socket without pin)
- Weight: 0.655 kg
What it works with
The controller is designed for heating devices such as heating cables, heat mats, heating bulbs and heat emitters, and aquarium heaters. On the cooling side it supports chillers and fans. The 1200 W total load limit applies to all devices connected to the sockets together.
Technical specification
This product has no reviews yet. Be the first!
Write your review
Frequently asked questions
Yes, it has separate inputs for heating and cooling, so one unit can control a heating device such as a heat mat, heat cable, bulb or aquarium heater, and a cooling device such as a fan or chiller. The maximum total load is 1200 W (2x600 W).
Yes, the thermostat has separate settings for day and night, and you can set the start time of each period. It also allows you to program hysteresis and an alarm.
Temperature reading and programming accuracy is 0.1 °C, and the maximum operating error of the thermostat is 1 °C. It measures the temperature every 5 seconds and works in a range from -30 °C to 90 °C.
The probe is waterproof and can be placed directly in water. Its dimensions are 8x8x40 mm, and the cable has a threaded connector with a seal to make the first installation easier.
The probe cable is 200 cm long, the power cable is 150 cm long with an EU plug with earth, and the outlet cable is 200 cm long. Programming is done with three touch buttons and takes about 2 minutes.
Questions & answers
No one has asked about this product yet.
Delivery methods
Payment methods
BLIK
Payment Cards
Przelewy24
PayPal
Google Pay
Apple Pay
Online bank transfer
Card, Apple Pay, Google Pay
Downloads
No files available for download for this product.
Similar products
See all
Eco Timer – mechanical timer
PC‑01 – LCD electronic programmer
Sold out
600W Dimmer Thermostat – resistive thermostat
Recently viewed
Sold out
Natural Moss Back&Bottom – moss backdrop and base, 50x25cm
Reptiland Black 25x19x7.5cm – black terrarium/faunarium
